碳纳米管阵列推力器放电特性的数值模拟研究

基于直接蒙特卡洛(DSMC)算法、浸入式有限元算法(IFE)、粒子云及蒙特卡洛碰撞(PIC-MCC)算法以及Ammosov-Delone-Krainov(ADK)隧穿电离模型建立了碳纳米管阵列推力器工质气体和CNT场电离过程的三维仿真模型。利用文献中的实验数据对本文仿真模型的有效性进行了验证,结果表明本文仿真模型与实验结果基本一致。针对碳纳米管阵列推力器的放电特性进行了研究,并重点分析了离子与原子碰撞过程对碳纳米管阵列推力器放电特性的影响。结果表明CNT可以极大地增强局部电场,稳态时场增强因子约为1308;与原子的碰撞使得离子在CNT附近更加集中,降低了局部电场,进而降低了其场增强能力。     

仿壁虎刚毛阵列对卫星表面吸附能力模型与计算

壁虎脚的粘着机理对航天机器人脚掌的研制和开发具有重要启发意义.通过单根刚毛与光滑表面黏着力模型与计算、卫星粗糙表面分布模型与接触概率与计算、刚毛阵列与卫星粗糙表面黏着力模型与计算等，分析仿壁虎刚毛阵列对卫星表面的吸附能力，发现在一定条件下仿壁虎刚毛阵能够在太空失重环境中黏着在卫星表面，对航天舱内爬行机器人、管道机器人的研制和开发具有重要的启示意义.     

Direct position determination using single moving rotating linear array: Noncoherent and coherent processing

To improve the resolution and accuracy of Direct Position Determination (DPD), this paper investigates the problem of positioning multiple emitters directly with a single moving Rotating Linear Array (RLA). Firstly, the geometry of the RLA is formulated and analysed. According to its geometry, the intercepted noncoherent signals in multiple interception intervals are modeled. Correspondingly, the MUltiple SIgnal Classification (MUSIC) based noncoherent DPD approach is proposed. Secondly, the synchronous coherent pulse signals are individually considered and formulated. And the coherent DPD approach which aims for localizing this special type of signal is presented by stacking all array responses at different interception intervals. Besides, we also derive the constrained Cramér-Rao Lower Bound (CRLB) expression for both noncoherent and coherent DPD with RLA under the constraint that the altitudes of the emitters are known. At last, computer simulations are included to examine the performance of the proposed approach. The results demonstrate that the localization accuracy and resolution of DPD with single moving linear array can be significantly improved by the array rotation. In addition, coherent DPD with RLA further improves the resolution and increases the maximum emitter number that can be localized compared with the noncoherent DPD with RLA.     

椭圆振动切削加工的同步控制研究

利用椭圆振动切削加工的回转体表面微织构是在机床主轴旋转、平台进给和装置椭圆振动的联合运动下得到的,机床主轴转动与装置位移输出如果不能保持完全的实时同步,会造成微织构加工的偏差。为了解决这一问题,提出了一种新的基于转角的同步控制方法,该方法在主轴的对位基准处实现装置正弦信号的复位,以修正转速漂移造成的加工位置误差,并通过判断主轴角度信号实时输出对应幅值电压来实时同步信号输出和机床旋转运动。基于LabVIEW FPGA搭建同步控制模块,经试验验证,利用该方法加工的矩形阵列微织构轴向排列与中轴线平行,与周向排列的夹角和仿真结果的偏差不超过0.1°,织构深度随转角的不同发生预设的变化,因此,同步控制方法具有实时同步控制椭圆振动切削装置的能力。     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。     

高速SpaceWire协议IP的可靠性增强方法

针对航天高速SpaceWire总线系统对协议IP的高可靠性要求，提出一种用于静态随机访问存储器(SRAM)型现场可编辑逻辑门阵列(FPGA)的增强三模冗余(TMR)方法。该方法对传统三模冗余和部分三模冗余做了改进，将需要进行三模冗余的原设计分为一般单元集和可靠性薄弱的关键单元集，对一般单元集中的每个单元做三模冗余，对关键单元集中的每个单元做顺序四模冗余。给出了顺序四模冗余的可靠度计算式和表决器的布尔表达式。建立了系统可靠性的马尔科夫模型并基于模型开展了可靠性仿真。仿真结果表明增强三模冗余系统的可靠性不仅明显优于传统三模冗余系统，而且优于部分三模冗余系统，使系统可靠性得到有效提高。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.     

视觉测振技术在柔性太阳翼模态试验中的应用

针对8 m×5 m的柔性太阳翼在倒立状态下进行模态试验，设计数字摄像视觉测振系统，基于图像特征跟踪法实现了从相机标定、图像采集、信息提取到三维振动数据获取的过程，通过工况模态辨识方法获取了柔性太阳翼模态频率及振型等动力学参数。并考虑空气和重力影响建立太阳翼有限元模型，通过与基于基恩士激光位移传感器的传统模态试验结果及仿真分析结果进行对比，验证了基于视觉测振工况模态试验方法的准确性，为柔性太阳翼在轨模态辨识奠定基础。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

组合临界流文丘里喷嘴空气流量测量方法高空舱应用分析

为满足发动机高空试验低流速进气条件下空气流量精确测量,减小进气导管气流附面层影响,弱化空气流量测量与被试发动机相关性。分析了单件/组合临界流文丘里喷嘴的工作特性,给出了组合临界流文丘里喷嘴(ACFVN)空气流量计算方法,依据给定试验发动机和高空舱尺寸设计了临界流文丘里喷嘴组合结构,得到了组合临界流文丘里喷嘴在高空舱应用的控制方法和测试布局。采用小尺寸喷嘴对组合喷嘴设计和应用方法进行了验证,结果表明:采用打开/关闭喷嘴数量和调节进气压力两种组合方式在高空舱内应用方法可行,测试布局满足测量要求,下游发动机进口截面气流紊流度优于0.3%,满足发动机高空模拟试验要求。